701 Waverly Street, Framingham, MA 01702 -- (888) CONIG - 25
2 Face Blocks
Inside Corner Blocks
Inside Corner Blocks
Want your chosen designer imprint finish to wrap around the end of the wall or around your corners? Our 2 Face Blocks are the solution!
Inside Corner Blocks
Inside Corner Blocks
Inside Corner Blocks
If you have a designer imprint finish and an inside corner, our Inside Corner Blocks will provide the perfect fit!
Flat Top Blocks
Inside Corner Blocks
Drain Hole Blocks
Flat Top blocks are blocks with the knobs blanked out, i.e. eliminated from the top when pouring the blocks. This is a more cost-effective way to use our standard 2x2x2, 2x2x4 or 2x2x6 blocks as the final course of blocks rather than using an additional layer of cap blocks that are not needed to retain earth.
Drain Hole Blocks
Custom Angle Blocks
Drain Hole Blocks
Need to pass water through the wall? Our Blocks with Drain Holes make that job easy!
You can connect your behind wall drain system right to the imbedded pipe that we precast into the block(s).
Radius Blocks
Custom Angle Blocks
Custom Angle Blocks
Think straight walls are boring? All our 2x2x4 standard series blocks can be poured as radius blocks which are compatible with our straight blocks for seamless transitions.
Radius blocks can be used for convex and concave curves with as little as a 14' radius.
Custom Angle Blocks
Custom Angle Blocks
Custom Angle Blocks
Need a custom angle in your wall rather than a curve or a 90 degree corner? We can custom precast a block at your desired angle.
Shelf Top Blocks
Shelf Top Blocks
Shelf Top Blocks
Want your lawn, mulch or asphalt to come right over the top of your new retaining wall? Our Shelf Top Blocks are the perfect solution!
Step Down Blocks
Shelf Top Blocks
Shelf Top Blocks
Does your wall step down in certain areas? Don't worry, we offer Step Down Blocks which are blocks with one male on top rather than two. We offer Step Down Right Blocks (right male missing when looking at front) as well as Step Down Left Blocks. The picture shows Step Down Right Blocks in use.
Notch Blocks
Shelf Top Blocks
BlockLock System
Notch Blocks are used if you want to go over a footing, an existing underground pipe or any other obstacle in your path.
Don't spend time cutting a block - we can custom pour a block with a notch to go over the obstacle!
BlockLock System
Custom Headwall Blocks
BlockLock System
Looking for even more strength in your retaining wall or material bin system? Conigliaro Block's BlockLock System may be the answer!
Wedge Blocks
Custom Headwall Blocks
Custom Headwall Blocks
Wedge Blocks are used if you want to lean your wall back into the hillside to eliminate the need for geogrid up to 12 feet in wall height. You create a level pad, place the wedge blocks on the level pad, then simply stack the blocks on top of the wedges. The result - a 12 degree lean in the wall!
Our standard wedge block is 4' deep x 6 feet long by 1.1' high, creating 12 degree base for your wall.
Custom Headwall Blocks
Custom Headwall Blocks
Custom Headwall Blocks
Need a headwall built right into your retaining wall? Conigliaro Block will custom precast a section that is fully compatible and interlocks with our retaining wall blocks for a seamless fit!
A Collection of Conigliaro Block's Speciality Blocks...
